Need help for installing with Arch Linux

Support for the Uninterruptible Power Supply
with Peripherals and I2C control Interface
Raspberry Pi® B+, A+, B, and A

Need help for installing with Arch Linux

Postby MüMyPEE » Tue Apr 18, 2017 1:55 pm

Hi to all!

As totally new in Linux i would need urgent help to get the UPSPico running here on my needed Arch Linux for this project. I have got everything to work except the UPSPico.
The commands in manual are not working here. Can someone plz "translate" all the commands so i can use the installmanual with this Linux version?
I am totally lost and need a step by step howto...

For example:
sudo apt-get install python-rpi.gpio
sudo apt-get install git python-dev python-serial python-smbus python-jinja2 python-xmltodict python-psutil python-pip
cd ../upspico/picofssd


Thank you so far!

Kind Regards,
MüMypEE
MüMyPEE
 
Posts: 22
Joined: Tue Apr 18, 2017 1:40 pm

Re: Need help for installing with Arch Linux

Postby Pimaster » Tue Apr 18, 2017 2:38 pm

HI,
You have PIco HV3.0 and not HV1.1 so posted to wrong forum.
Please post it again to one of this one

viewforum.php?f=20
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Pimaster
Site Admin
 
Posts: 1607
Joined: Fri Sep 14, 2012 7:50 am


Return to UPS PIco

Who is online

Users browsing this forum: Bing [Bot] and 3 guests

cron