New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1

Support for the Uninterruptible Power Supply
with Peripherals and I2C control Interface
Raspberry Pi® B+, A+, B, and A

New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1

Postby Pimaster » Thu Aug 10, 2017 10:56 am

Hi, we are finally going to release the new Firmware 3.0 for the UPS PIco HV1.0 and HV1.1 based in 80 % on the new PIco HV3.0 firmware. It will be based on same Daemons.
Our questions are the following
1. We are planning to use the new addresses and allocations for the registers sets, that will cause users will need to re-write their
2. We will release an old firmware (still working with the old python script), adopted to the new kernel 4.9 no other changes will be implemented on this firmware

As the final firmware for the HV3.0 is mostly ready, we are going to copy most of it to the old PIco. Please write here any ideas or opinions about the ongoing developments. We expect to release it before 15 of September
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Pimaster
Site Admin
 
Posts: 1569
Joined: Fri Sep 14, 2012 7:50 am

Re: New Firmware 3.0 for the UPS PIco HV1.0 and HV1.1

Postby aleph » Tue Aug 15, 2017 3:21 pm

The most important thing is that you release a new firmware (compatible with 4.9 kernel) as soon as possible. Please no more delays...

Therefore option 1 should be preferred.
aleph
 
Posts: 12
Joined: Thu Jan 28, 2016 5:05 pm


Return to UPS PIco

Who is online

Users browsing this forum: No registered users and 1 guest

cron